Inteset USB External Infrared (IR) Media Center Receiver with Cable
This custom IR Receiver is connected to any USB 2.0 external connector on your computer with the cable provided and is ready to go. It is for use with media applications only. The outer casing of the receiver is so small (1 1/4″L x 7/8″W x 5/8″H) that it can be mounted almost anywhere with the included double stick tape. The cable is 60″ long so that you can have your computer in a cabinet and put the receiver on a shelf. This Receiver can be used with any RC6 Protocol Remote including our INT422 Universal Remote. This Receiver is not for use with the Xbox One.
The eHome drivers will load automatically when the USB plug is inserted in the computer’s USB connector on W7 & W8. You will have to load the eHome drivers for W10. Be sure that your Device Manager shows the eHome drivers loaded under Human Interface Devices as well as Universal Serial Bus Controllers as shown in the screen shot above. If you remove the USB plug from the computer the two eHome listings should disappear. If you have any issues, remove the plug and re-insert it.