Inteset HDMI IR Extender for Connecting One A/V Device to a Display over existing HDMI Cable

$21.95

  • Allows an A/V Device with an existing newer HDMI Cable to be controlled by any IR Remote
  • Supports nearly all A/V devices with IR 20 kHz to 60 kHz signal
  • Plug & Play between A/V Device and Display/TV, No additional Power needed
  • Lifetime Warranty on all parts and labor.
  • Fast U.S. Based Support and Service.
SKU: INT-HDMIIR-TX Category:

Description

Inteset HDMI IR Extender for Connecting One A/V Device to a Display over existing HDMI Cable

This kit allows you to control any A/V device such as your cable box, A/V amp/receiver, etc. that has an HDMI cable connecting your A/V device to your TV or Display. A popular use of the kit is when the device you want to control is in a different room or behind closed doors. The kit uses the CEC channel that is part of almost all HDMI cables. Some older HDMI cables will not work because they do not have the needed channel. A good quality HDMI cable will allow you to control your device from up to 75 feet or more. The higher the quality of your cable the longer the transmit distance.

Any remote that controls your A/V device will work with this kit. Most Universal Remotes including our INT422 Remote can be used with this set-up.

Installation is simple. Attach each end of your HDMI cable to one of the adapters. (Either adapter will work as the TX or RX unit) Then plug the adapters directly into the device you want to control and into the display device such as your TV. Both adapters must be set to “IR”. Then plug the IR receiver cable into the 3.5 mini connector on the adapter at your display and mount it where your remote can see the front of the IR receiver casing. At the A/V device you want to control you plug the IR Emitter cable into the 3.5 mini connector on the adapter you installed and place the Emitter casing near the IR receiver in the front panel of the A/V device.

Specifications: Carrier frequency- Broadband (20kHz to 60kHz), IR receiving distance: 30 feet, Max Operating Current: 15mA, Cable length of IR Receiver and Emitter: 5’, IR Adapter size: 1.50″L x 0.83″W x 0.43″H. No additional power is required.

Additional information

Weight 4 oz
Dimensions 8 x 5 x 1 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.